Homemade Magnetic Board – Versatile Gift

My inspiration for this project is a cute little magnetic board that I have at work.  It is a 5×7 size photo frame wrapped in metal and it came with cute magnets.  My friend really wanted one and I couldn’t find where I could purchase one.  So I decided to make one.

Step 1:  Purchase a picture frame.  In order to be green I bought one at the local thrift store, and this one was already damaged.  Who would buy it anyways?  Cost $2.99

Step 2:  Demolition.  You have to take it apart to make it pretty.

Step 3: Voilà.  Not done yet!

Step 4:  Prime.  I used a low VOC primer so it’s more earth friendly.  However, it does still stink.  I primed because the frame was glossy and I wanted my final paint to stick.  Sorry for no picture.  But you didn’t really need a picture exactly as above but in white, did you?

Step 5:  Cut metal to fit frame.  I bought a piece at Home Depot about 12 x 20 inches.  Larger than the frame but not too huge for the trunk of my car.  When you buy metal make sure to pick a metal that is magnetic.  I bought iron.  I also brought in a magnet just to be sure.  I cut the metal with tin snips that I had on hand.  Jagged edges = beware!

Step 6: Iron the fabric.

Step 7:  Cut fabric so there’s enough to wrap around the metal.  I also taped the cut edges of the metal so it wouldn’t cut the fabric after it was all assembled.

Step 8: Glue the fabric to the metal.  This took the longest because I had to wait for the glue to dry before I started the opposite side.  I am a bit of a perfectionist so I folded down the edges so you can’t see any fabric fray.  Tip: This is awesome glue.  I wanted something industrial for the magnets, that I also made for this project, but also that I could use to glue the back of this metal.   It’s low VOC glue and it dries fast.  I couldn’t even smell it.  Awesome purchase.  I remember in my interior design classes we had to buy this 9000 crap which you had to use a gas mask for.  Awful stuff.  Not this!  Two thumbs up!

Sometime between Step 4 and Step 9 you have to paint the frame the color of your choice.

Step 9: Assemble gift.  Just put the frame back together.  Minus the glass.  I also painted the back to this so it looked professionally made.  See the cute magnets?  They are just buttons glued to strong magnets I purchased at the craft store.

My friend who is receiving this gift loves the color blue, so I had to pick a fabric just for her.  You can also personalize this by different size frames, different fabrics and even stamp on some letters to be specific to the receiver.  Your friends will love the homemade-ness of this gift.  I think a boy may even like this!  Pictures of cars and girls I would suppose. 

Published by

Ashley

I love art, being green and photography. I am putting all of those things together in this blog. I love sharing my favorite DIY crafts, green tips and home improvements. Join me in my journey of creative; simple living.

One thought on “Homemade Magnetic Board – Versatile Gift”

Leave a Reply

Your email address will not be published. Required fields are marked *